Anixter's newsletter is committed to delivering the latest news and best practices around
cable management, fasteners and finishing products.
NEW Heyco®Snap-In Ratcheting Strain Relief For Round and Double D Holes
We are pleased to announce the introduction of the new Snap-In Ratcheting Strain Relief Bushings for standard round, and Double "D" holes.
Designed to protect flat, round or multiple cables at panel entry points, the Ratcheting Strain Relief is assembly-friendly and can be pre-assembled offline for final assembly at a later time - or remote location for lower installed costs. Simple fingertip pressure allows easy installation into a standard round or Double "D" hole - no clumsy hand tools are required.
The strain relief's unique wire locking ratchet accommodates a generous wire range from 2,9 mm to 14,6 mm and fits panel mounting hole size 22,2 mm w/19,6 mm flats.
Heyco®: Lay-In Strain Relief Bushing For Split Panel Mounting Holes
The Heyco®: Lay-In Strain Relief Bushing is designed to be installed in a split panel mounting hole or dropped into a slot.
Assembly friendly and independent of insertion into the panel, the Lay-In Strain Reliefs self-locks onto the cable. Thus, they may be preassembled off-line for final assembly at a later time or remote location, for lower installed cost!
The unique wire locking ratchet can be used for one cable or bundles of cables (round or flat wire), allows for a generous wire range from 6,4 mm to 15,2 mm and protects against forces of pull, push, or twist.